The Default Model:  Follow YAW

Follow Flight Controller, Follow PITCH/ROLL are support also, but it need set by customers.

Please fine tuning the value to 

RC_PITCH : 1500

RC_YAW: 1500

Click "WRITE" 

3. Selece the COM Port and connected:

     Select your RC input Mapping 

          Normal(PPM or Analog)
          Futaba sbus

2. Powered for gimbal & RX, and connect to GUI

1. Mount the GoPro camera, connected  gimbal & RX

Links to Rctimer Manuals and Videos

4. Calibration your RC

​Click "Realtime Data", check the value of RC_PITCH & RC_Yaw(the value should be 1500):